Miller Spectrum 375

The Spectrum 375  Cuts 1/4 inch mild steel at 27 in./minute and 3/8 inch steel at 14 in./minute. It will sever at 5 in./minute.

  • Dual input voltage capability to run on 110 or 220 VAC input power.
  • Automatic protection in case of incorrect input power switch setting.
  • Starts without high frequency, will interfere with computers or remote controls.
  • The pilot arc controller allows the to spectrum 375 to easily cut expanded metal.
  • Low-pressure LED indicators for power, pressure, cup and temperature.
  • Consumables storage compartment.
  • Post air cooling circuit continues cooling airflow after the trigger is released.

Input voltage: 115 - 230 V 1 Phase
Input current: 120 volt 20 amp(min), 230 volt 15 amp(min)
Output current: 27 A
Duty cycle: 35% Duty Cycle @ 27A 90 VDC
Gas supply: built-in, heavy-duty compressor

Cut capacity

Recommended:3/8"
Maximum: 1/2"
Sever: 5/8"

MILLER ELECTRIC 907529 Plasma Cutter Inverter Spectrum 375
MILLER ELECTRIC 907529 Plasma Cutter Inverter Spectrum 375 $1,607.32
Time Remaining: 42m
Buy It Now for only: $1,607.32
MILLER SPECTRUM 375 X TREME PLASMA CUTTER 907529
MILLER SPECTRUM 375 X TREME PLASMA CUTTER 907529 $1,419.00
Time Remaining: 12h 37m
Buy It Now for only: $1,419.00
Miller Millermatic 211 and Spectrum 375 Dream Bundle 907614
Miller Millermatic 211 and Spectrum 375 Dream Bundle 907614 $3,895.00
Time Remaining: 3d 4h 4m
Buy It Now for only: $3,895.00
Miller Millermatic 211 MIG Welder and Spectrum 375 Plasma 907614 907529
Miller Millermatic 211 MIG Welder and Spectrum 375 Plasma 907614 907529 $2,598.00
Time Remaining: 3d 4h 7m
Buy It Now for only: $2,598.00